Hermetic Paramount Industrial Epoxy Flooring in Tampa, FL
The HERMETIC PARAMOUNT Series of flooring systems are 100% solids, high build, non-slip, non-shrink self-leveling, resinous floor designed for a wide variety of applications. These systems will not blush or water spot and has excellent physical and chemical resistant properties. They are designed with either a slurry or mortar finish. They are available in either solid pigment or colored quartz for a speckled finish. The series is FDA, USDA, and CIFA acceptable.
HERMETIC Paramount Series of flooring systems are commonly used in commercial or industrial buildings were a thicker floor is needed for protection from heavy equipment and/or heavy vehicle traffic. This series is often found in manufacturing areas, airports, and heavy equipment shop areas.
Hermetic PARAMOUNT SLURRY (SILICA)
The HERMETIC PARAMOUNT SLURRY Silica system is a four coat system that provides a solid pigmented color all the way through the application with a silica sand textured finish. This slurry broadcast system offers a thick floor in one single broadcast instead of two, which cuts down on labor time. This is also a great option to coat pitted or damaged concrete surfaces to smooth them out. The finished system has a sand texture and should be around 200 – 250 mils thickness.
Hermetic PARAMOUNT SLURRY (QUARTZ-PT1)
The HERMETIC PARAMOUNT SLURRY Quartz-PT1 system is a four coat system that is a high build, self-leveling, resinous slurry flooring system with a decorative quartz finish. Similar to the standards ‘silica’ system, but this offers a more decorative finish. The overall finished system adds a medium texture to the floor and should be completed at approximately 200 – 250 mils.
Hermetic PARAMOUNT SLURRY (QUARTZ-VR1)
The HERMETIC PARAMOUNT SLURRY Quartz-VR1 system is a four coat system that is a high build, self-leveling, resinous slurry flooring system with a decorative quartz finish. Similar to the standards ‘silica’ system, but this offers a more decorative finish. The overall finished system adds a medium texture to the floor and should be completed at approximately 200 – 250 mils.
Hermetic PARAMOUNT HD (ELITE S)
The HERMETIC PARAMOUNT ELITE S system is a heavy duty troweled epoxy mortar system. These floors are meant for the toughest conditions and heavy traffic areas. It is formulated for extreme abrasion, wear and chemical resistance. This system uses pigmented resins and silica sand for the mortar coat and is finished off with a pigmented urethane with a fine aluminum oxide mixed in for additional wear resistance. It should be completed at 250-300 mils or almost 5/16” thickness.
Hermetic PARAMOUNT HD (ELITE PT)
The HERMETIC PARAMOUNT Elite PT system is a heavy duty troweled epoxy mortar system. These floors are meant for the toughest conditions and heavy traffic areas. It is formulated for extreme abrasion, wear and chemical resistance. This system of industrial epoxy flooring in Orlando, FL uses clear epoxy resins with decorative colored quartz aggregate and is finished off with a clear urethane with a fine aluminum oxide mixed in for additional wear resistance. It should be completed at 250-300 mils or almost 5/16” thickness.
Hermetic PARAMOUNT HD (ELITE Q)
The HERMETIC PARAMOUNT Elite Q system is a heavy duty troweled mortar system for industrial epoxy flooring in Tampa, FL. These floors are meant for the toughest conditions and heavy traffic areas. It is formulated for extreme abrasion, wear and chemical resistance. This system uses clear epoxy resins with decorative colored quartz aggregate and is finished off with a clear urethane with a fine aluminum oxide mixed in for additional wear resistance. It should be completed at 250-300 mils or almost 5/16” thickness.
EXAMPLES
Share On: